JC Mini Solar Insecticidal Lamp Controller PWM 6V 12V 1A 3A 5A
This JC Mini Solar Insecticidal lamp Controller is a new generation intelligent controller integrate with charge and discharge function, it has strong stability and long lifetime. This series with battery voltage automatic identification function, PWM charging mode and comprehensive protection function,such as overcharge, over-discharge, over-current, short-circuit, reversed.
Specifications
| Model | JC | | Rated Voltage | 6V/12V | | Strong charging pressure | 7.4/14.8V | | Equilibrium charging | 7.25/14.5V | | Float charging pressure | 6.85/13.7V | | Under voltage | 5.4V/10.8V | | Under recover voltage | 6.5/13V | | Non –load current | ≤6mA | | Charging circuit voltage drop | ≤0.2V | | Discharge circuit voltage drop | ≤0.1V | | Maximum charging current | 1A 3A 5A | | Maximum load current | 1A 3A 5A | | Controller protection | overcharge, over-discharge, over-current, short-circuit, reversed | | Charging Mode | PWM Charging Mode | | Using elevation | ≤5500m(more than 2000m should be used in lower power | | Working temperature | －20℃～55℃ | | Gross Weight (KG) | 0.05KG | | Net Weight (KG) | 0.035KG | | Product size(Length*Width*Height) | 79.5mm*52mm*21.5mm | | Protection level | IP22 | |
Product Advantages:
1. 12V 24V 48V system voltage auto identify.
2. MPPT charging efficiency more than 99.5%.
3. Fanless design with no nosie and free maintainless
4. With RS485 communication interface,more intelligent.
5. Support data storage, storage time can be up to 10 years.
6. Synchronous rectification technology.
7. Dual peaks and multi-peak tracking technology.
8.Japan imported power kits with better performance and more durable.
9. Common cathode circuit design makes the system more stable and reliable.
10. Support for parallel conenction, 99 sets max.
11.Super heat sink and fanless design with no nosie and free maintenance-free.
Product Parameters:
| Parameters Name | The parameter values (and adjustable range) | Default values | | Current | 10A | 20A | 30A | 40A | | | System Voltage | 12V,24V,48V | | | Photovoltaic max input voltage | 20V～100V(12V system Voltage) 40V～150V(suggest lower than 145V)(24Vsystem Voltage) 80V～150V(suggest lower than 145V)(48Vsystem Voltage) | | | Rated working current | 10A | 20A | 30A | 40A | | | Photovoltaic max input power | 120W/12V 240W/24V 480W/48V | 240W/12V 480W/24V 960W/48V | 360W/12V 720W/24V 1440W/48V | 480W/12V 960W/24V 1920W/48V | | | Output Rated Current | 10A | 15A | 20A | 20A | | | MPPT efficiency | ﹥99.5% | | | Conversion efficiency | ﹥96% | | | Over voltage (over charge) | 16～17V,×nV | 16V,×nV | | Over voltage recovery | 15～15.5V, ×nV | 15V,×nV | | Charging limit voltage | 15.5～16V, ×nV | 15.5V,×nV | | Equalizing charge voltage | 15～15.5V, ×nV | 15.2V,×nV | | Boost charge voltage | 14～15V, ×nV | 14.4V,×nV | | Boost charge recovery | 12.3～13.5V,×nV | 13.2V,×nV | | voltage | 13.2～14.0,×nV | 13.8V,×nV | | Over discharge voltage | 9.8～11.8V,×nV | 10.8V,×nV | | Over discharge recovery | 12.0～13.0V,×nV | 12.6V,×nV | | Equalizing charge time | 1/2/3 hour | 1H | | Boost charge time | 1/2/3 hour | 1H | | Device address | 1～99 | 6 | | Light control OPEN voltage | 5～11V | 5 | | Light control CLOSE voltage | 5～11V | 6 | | Light control time delay | 10min | | | Temperature compensation | 0～4 | 4 | | Over temperature protection | When the temperature reaches 75 ℃ charging current is limited to half of the rated current, When the temperature reaches 90 ℃ charging and load are shut off | | | Working temperature | -20℃～50℃ | | | Storage temperature | -40℃～80℃ | | | Humidity | 10% ～ 90% Non-condensate | | | Weight | 2.15kg | | | Size | 185*193*80mm(20～30A) | |
|
