JN-T 36V 48V 60V 72V Solar Charge Controller 10A 20A 30A
The JN-T series charge controller is the new generation of intelligent solar charge and discharge controller, it has strong stability and high service life. Suitable for 36V 48V 60V 72V battery voltage.
Functions:
1.The solar controller has household type and street lamp type in the design of an organic whole.
2.The controller has 12 v, 24 v automatic identification and suitable for 36V 48V 60V 72V battery voltage.
3.The controller has light control and time control (street lamp type).
4.The controller has the overcharge, discharge, over current, short circuit, answer back and protective measures.
5.Scientific and rigorous shape design, the use of high-grade protection means.
6.With the Strong charging and equilibrium charging, floating three-step PWM control charging ways.
Parrameters:
| Rated voltage | 12V/24V,AUTO | 36V | 48V | | Strong charging pressure | 14.8V/29.6V | 44.4V | 59.2V | | Equilibrium charging | 14.5V/29V | 43.5V | 58.0V | | Float charging pressure | 13.7V/27.4V | 41.1V | 54.8V | | Under voltage protection | 10.8V/21.6V | 32.4V | 43.2V | | Under recover voltage | 13V/26V | 39V | 52.0V | | Maximum-charging current | 20A/25A/30A | 10A/20A/30A | 10A/20A | | Maximum load current | 20A/25A/30A | 10A/20A/30A | 10A/20A | | Over load protection | 3s recover 1.2 times, 10s recover 1.5 times, more than two times need manual recover | | Maximum wire diameter | 4mm² | | Working temperature | -40-60℃ | | Weight (gross) | M | | Product size | 136*92*31mm | | Protection level | IP56 | |
Product Advantages:
1. 12V 24V 48V system voltage auto identify.
2. MPPT charging efficiency more than 99.5%.
3. Fanless design with no nosie and free maintainless
4. With RS485 communication interface,more intelligent.
5. Support data storage, storage time can be up to 10 years.
6. Synchronous rectification technology.
7. Dual peaks and multi-peak tracking technology.
8.Japan imported power kits with better performance and more durable.
9. Common cathode circuit design makes the system more stable and reliable.
10. Support for parallel conenction, 99 sets max.
11.Super heat sink and fanless design with no nosie and free maintenance-free.
Product Parameters:
| Parameters Name | The parameter values (and adjustable range) | Default values | | Current | 10A | 20A | 30A | 40A | | | System Voltage | 12V,24V,48V | | | Photovoltaic max input voltage | 20V～100V(12V system Voltage) 40V～150V(suggest lower than 145V)(24Vsystem Voltage) 80V～150V(suggest lower than 145V)(48Vsystem Voltage) | | | Rated working current | 10A | 20A | 30A | 40A | | | Photovoltaic max input power | 120W/12V 240W/24V 480W/48V | 240W/12V 480W/24V 960W/48V | 360W/12V 720W/24V 1440W/48V | 480W/12V 960W/24V 1920W/48V | | | Output Rated Current | 10A | 15A | 20A | 20A | | | MPPT efficiency | ﹥99.5% | | | Conversion efficiency | ﹥96% | | | Over voltage (over charge) | 16～17V,×nV | 16V,×nV | | Over voltage recovery | 15～15.5V, ×nV | 15V,×nV | | Charging limit voltage | 15.5～16V, ×nV | 15.5V,×nV | | Equalizing charge voltage | 15～15.5V, ×nV | 15.2V,×nV | | Boost charge voltage | 14～15V, ×nV | 14.4V,×nV | | Boost charge recovery | 12.3～13.5V,×nV | 13.2V,×nV | | voltage | 13.2～14.0,×nV | 13.8V,×nV | | Over discharge voltage | 9.8～11.8V,×nV | 10.8V,×nV | | Over discharge recovery | 12.0～13.0V,×nV | 12.6V,×nV | | Equalizing charge time | 1/2/3 hour | 1H | | Boost charge time | 1/2/3 hour | 1H | | Device address | 1～99 | 6 | | Light control OPEN voltage | 5～11V | 5 | | Light control CLOSE voltage | 5～11V | 6 | | Light control time delay | 10min | | | Temperature compensation | 0～4 | 4 | | Over temperature protection | When the temperature reaches 75 ℃ charging current is limited to half of the rated current, When the temperature reaches 90 ℃ charging and load are shut off | | | Working temperature | -20℃～50℃ | | | Storage temperature | -40℃～80℃ | | | Humidity | 10% ～ 90% Non-condensate | | | Weight | 2.15kg | | | Size | 185*193*80mm(20～30A) | |
|
